三菱PC Iupilon EFD2230U 產品特性：光擴散級，防火阻燃1.5mm V0，高粘度，擠出級，LED燈管專用 塑膠原料

我公司提供的產品均為正牌塑膠原料，品質保證，貨源穩定，送貨上門，可免費提供官方物性表、UL黃卡，并隨貨提供RoHS報告、SGS報告等，索取權威資料請致電13268582149

PC EFD2230U 物性表：

Physical	Nominal Value	Unit	Test Method
Density	1.20	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)	4.0	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (300°C/1.2 kg)	4.00	cm³/10min	ISO 1133
Molding Shrinkage
Across Flow: 3.20 mm	0.50 to 0.70	%
Flow: 3.20 mm	0.50 to 0.70	%
Water Absorption (Saturation, 23°C)	0.24	%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	2400	MPa	ISO 527-2
Tensile Stress (Yield)	66.0	MPa	ISO 527-2
Tensile Strain (Yield)	6.0	%	ISO 527-2
Nominal Tensile Strain at Break	100	%	ISO 527-2
Flexural Modulus	2300	MPa	ISO 178
Flexural Strength	97.0	MPa	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	13	kJ/m²	ISO 179
Charpy Unnotched Impact Strength (23°C)	No Break		ISO 179
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	136	°C	ISO 75-2/B
Heat Deflection Temperature (1.8 MPa, Unannealed)	123	°C	ISO 75-2/A
CLTE - Flow	0.000065	cm/cm/°C	ISO 11359-2
CLTE - Transverse	0.000066	cm/cm/°C	ISO 11359-2
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	6.0E+15	ohms	IEC 60093
Volume Resistivity	3.0E+16	ohm·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (1.50 mm)	V-0		UL 94