9FQ系列飼料粉碎機技術參數
9FQ Series Feed Crusher Technical Parameters
型號/指標/項目
Model/index/item 實驗物料
Material tested 臺時產量Output kg 噸料電耗
Ton power consumption 配用動力
Power equipped KW 篩孔Screen hole ?
9FQ50-50 玉米Core 3000-350 18.5 22-30 2.5
9FQ50-40 玉米Core 1500-2000 19.27 18.5-22 2.5
9FQ60 花生秧
Peanut plant 800 8.8 13-15 2.5
9FQ50 玉米Core 800-1200 8.7 7.5-11 2.5
9FQ420 花生秧
Peanut plant 400 6.6 7.5-11 2.5
9FQ40 玉米Core 500-800 4.5 5.5-7.5 2.5
9FQ320 花生秧
Peanut plant 300 2.1 5.5-7.5 2.5
 
使用本機注意事項：
    1、粉碎機應固定在鋼制或木制磨架上；
    2、使用三通出料口，兩個袋子不得短于5米；
    3、被粉碎的物料應清除夾雜的石塊、鐵塊；
    4、料物堵塞時嚴禁用手和鐵棒拔料；
    5、更換錘片用稱稱好，四組錘牌平衡好；
    6、掛皮帶前注意旋轉方向，嚴禁反轉；
    7、工作前向兩軸承加油，不準超負荷工作；
    8、紅色均為警告標志，均勿靠近伸手。
Points for Attention of Using the Machine:
    1、The crusher shall be fastened on the steel or wood framework;
    2、Use three-way discharging hole, 2 bags shall not be less than 5 m;
    3、The materials crushed shall be cleaned from stones and iron blocks;
    4、It’s strictly prohibited to touch the machine with hand or use steel iron to touch.
    5、Weigh the hammer piece with scale, and properly balance the four groups of hammer of the scale
    6、Pay attention to the rotation direction before installing the strap and reverse is prohibited;
    7、Refill lubricant oil into both bearings before working, it’s allowed to work overload;
    8、All red marks are warnings, please don’t touch with hand.

 配套帶輪
Auxiliary strap wheel
型號
Model 四級電機
Four anode motor 柴油機
Diesel oil mahcine
50-50 280 220
50-40 280 220
60 300 240
420 320 280
320 300 240